RMC Brass Bullet StarterA hardwood bullet starter that features solid brass long and short rods. 3/8" diameter rod is for 44-54 caliber firearms. 5/16" diameter for 36 caliber.
|ML004||3/8 diameter for 44-54 Caliber||$9.99|
|ML0045||5/16 diameter for 32 - 40 Caliber||$9.99|
RMC Brass Bullet Starter with PickThis bullet starter is similar to ML004 with a nipple pick. The nipple pick is threaded into the long rod of the starter. To use, simply turn it out. Always handy.
|ML005||3/8 diameter for 44-54 Caliber||$11.99|
RMC Rugged Rod Bullet StarterThis starter has the 1 /3/4" hardwood ball, a brass short rod, and a longer rod made out of the new black "Rugged Rod" space-age plastic.
|ML200||For Sabots and Buffalo bullets 3/8 diameter for 44-54 Caliber||$8.99|
Treso Short StarterFinely Crafted by Treso. These short starters are beautiful. Caliber specific for the best fit and function.
|TresoSS3240||32-40 Caliber Short Starter with wood ball and brass stem||$8.99|
|TresoSS4045||40-45 Caliber Short Starter wood ball and stem with brass tip||$8.99|
|TresoSS54up||54 or larger Caliber Short Starter wood ball and stem with brass tips||$8.99|
Thompson Center T-Handle Short Starter & Ramrod ExtensionT/Cís T-Handle Short Starter features a hardwood handle with a 2-piece solid brass rod, coupled with standard 10-32 threads. By removing the seating end of the brass rod, and screwing the T-Handle onto a standard ramrod, it will extend the length of your ramrod for easier seating of projectiles, especially during continuous shooting at the range. Provides you with extra leverage for firmer more uniform seating, converts your ramrod to a range rod.
|TC7079||TC T Handle Short Starter and Extension||$15.99|
CVA Power Belt Universal Bullet StarterThe PowerBelt Bullet Starter is a must for shooters who are interested in maximizing accuracy with any hollow or polymer point bullet - including PowerBelt Bullets.
The PowerBelt Bullet Starter comes with two sets of three loading tips to fit almost all hollow point bullet designs and one set of 3 tips for polymer point bullets. One tip goes on the short rod of the starter, one on the long rod, and one on the ramrod The PowerBelt Bullet Starter is a must for shooters who are interested in maximizing accuracy with any hollow or polymer point bullet - including PowerBelt Bullets.
Here's why. Any deformation of the bullet tip during the loading process will destroy the aerodynamic integrity of the bullet. Since the damage is done after the projectile is in the barrel, many shooters never figure out why their hollow or polymer points are producing inconsistent groups. But think about it. Many tight fitting projectiles, especially sabots, must be virtually hammered down the bore - damaging the bullet tip.
The PowerBelt Bullet Starter solves this problem with loading tips that engage the bullet at either the base of the hollow point cavity or around the polymer point, not the nose of the bullet. Tight fitting projectiles can be loaded without any damage to the bullet ensuring that the perfect bullet you start down the barrel stays that way until it hits the target.
The PowerBelt Bullet Starter comes with two sets of three loading tips to fit almost all hollow point bullet designs and one set of 3 tips for polymer point bullets. One tip goes on the short rod of the starter, one on the long rod, and one on the ramrod.
|AC1500||CVA Universal Bullet Starter with 9 attachments||$15.99|
CVA Hollow Point Bullet Starter SetComes with separate attachments to fit most hollow points. Allows starting without deformation
|AC1435||CVA Hollow Point Bullet Starter Set||$16.99|